Phone: (+977) 1 4780680

Kent Elite I Water Purifier

Item No: Elite I

Availability: In stock


7% Off


Quick Overview

Full automatic operations
Leak-proof performance
Non-breakable plastic construction
Double purification

Estimate Shipping Cost
High purification capacity upto 25 litres/hour
KENT Elite has a high purification capacity upto 25 litres/hour and is suitable for commercial establishments, offices, restaurants and homes. It is also suitable for online purification and attachment with water coolers.
Double purification by RO + UF with TDS controller
KENT’s patented KENT's Mineral ROTM technology provides double purification of RO + UF, which removes even dissolved impurities such as chemicals and salts. The TDS controller maintains essential natural minerals, thereby providing 100% safe & tasty drinking water, which is ideal for consumption.
High flow-rate RO water purifier
KENT Elite uses 2 numbers RO membranes and a high pressure pump that allow high flow-rate of upto 25 litres/hour of purified water, thus making it possible to install with water coolers.
Removes even Dissolved Impurities while retaining Essential Minerals
Unlike UV and only RO purifiers, KENT's Mineral ROTM water purifiers remove dissolved impurities like chemicals, pesticides, rust, etc in water while retaining essential natural minerals that are required in drinking water
WQA Gold Seal Certified
KENT Elite is tested and certified for its performance and quality by renowned laboratories of the world such as WQA in USA. WQA Gold Seal is one of the most recognized certification in the drinking water treatment industry and provides assurance that the products have been rigorously tested and comply with all the requirements of the testing standards. KENT Elite is also CE certified.
Equally suitable for water from all sources such as bore-wells, tanks or tap-water
KENT Elite purifies water from different sources such as bore-wells, overhead storage tanks, water tankers and even municipal taps. Patented KENT's Mineral ROTM technology allows the user to adjust the TDS level of purified water and thus breaks the myth that RO purifier can only be used for raw water having TDS level greater than 500 ppm.
Optional hydrostatic storage tank
An optional hydrostatic storage tank of 8 or 20 litres capacity can be attached to KENT Elite. The hydrostatic tank ensures pressurized supply of purified water even in the absence of electricity or running tap water.
Fully automatic operation with auto-start and auto-off
Fully automatic operation allows the purifier to begin purification whenever water level in the purified water storage tank falls below maximum, and stop when the tank is filled or when there is no inlet water supply. This ensures trouble free operation without the need of manual intervention.
Built-in SMPS that supports wide range of input voltage (100-300V AC) for handling voltage fluctuations
KENT Elite incorporates a built-in rugged SMPS (Switching Mode power supply) instead of a standard power adaptor. It is equipped to handle a wide range of input AC voltage (100 – 300 Volts) which enables the purifier to stay resilient towards frequent power fluctuations, a common problem in developing countries like India.
Spin-welded RO membrane housing that prevents tampering
First of its kind in the industry, RO membrane housing is spin-welded using the latest technology, which ensures high quality permanent joints. Welded housing also prevents tampering and improves membrane life.
Push-fit components for leak-proof performance
All the fittings and components in the purifier are push (snap) fit to prevent leakages and wastage of water. Additional protection against leakages is built-in by using rubber O-Rings inside the push-fit fittings.
Food grade, non-breakable, ABS plastic construction
Non-breakable feature of ABS plastic ensures higher durability & longer life of the purifier. Food grade classification ensures that no harmful chemicals leech into purified water.
Applications Suitable for Purification of Brackish / Tap Water
Purification Capacity Upto 15 LPH*
Body Material ABS Food Grade Plastic
Mounting Suitable as attachment to water coolers
Dimensions(mm) L 415 W 222 H 410
Inlet Water Pressure/Temp (Min) 0.3 kg / cm2 or 4.267psi / 10°C
Inlet Water Pressure/Temp (Max) 3 kg / cm2 or 42.67psi / 35°C
Filter Cartridges Sediment, Carbon Block Filter, UF
Auto-Flushing System Yes
UV Lamp Wattage
Power Consumption 60 W
UF Filter Ultra Filtration Membrane
Weight 14.200 kg
Storage Capacity
Purification Production Rate 25 L/hr.
Maximum Duty Cycle
Membrane Type Thin Film Composite RO
Booster Pump Voltage 24 V DC
Mains Voltage 100 – 300 V~ AC / 50 Hz, 800mA

Got any questions about this product?


Additional Information

Weight 14.20 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


Warranty Period 1 Year from the Date of Purchase